Click here to edit subtitle

Fly Door

When the entry 'fly door' has been bashed about so much that it has to be replaced

Rectification is another fairly easy task 

  • Drill out the hinge rivets so you can remove the door 
  • Remove the outer skin. 
  • Replace the insulation in the door cavity
  • Repaint the inner skin whilst the door is off the trailer
  • Replace the rubber weather seal
  • Clean up the hinges
  • Fit a new outer skin, again using Olympic rivets so it blends with the rest of the trailer
  • Fabricate a panel to fit under the door locks (creating a flow line into the stress fracture panel) 
  • Edge new panels with rubber stripping

Click on an image to see the full picture & then < > arrows to view previous / next

Oops! This site has expired.

If you are the site owner, please renew your premium subscription or contact support.